Akordify

Online Violin Tuner (G D A E)

This free browser tool helps you tune your violin accurately. It detects your notes and frequency in real time.

How to use this violin tuner

To use this tuner, open the page in your browser. Select violin as your instrument and choose your preferred tuning preset. You may adjust the A4 reference frequency between 430 and 450 Hz if needed, though 440 Hz is the standard default. Click the start button to activate your microphone. Pluck or bow your G3, D4, A4, or E5 strings. The display shows your current note, its frequency, and a cents meter. A reading within 5 cents is generally considered in tune. If the meter shows a minus, your string is flat. If it shows a plus, the string is sharp. Adjust your tuning pegs or fine tuners until the meter centers.

Target notes and frequencies

Violin standard (G D A E)

StringNoteFrequency (A4 = 440 Hz)
4G3196.00 Hz
3D4293.66 Hz
2A4440.00 Hz
1E5659.26 Hz

String numbers follow the usual convention: string 1 is the thinnest full-length string. Frequencies are equal-tempered values for A4 = 440 Hz.

A Practical Guide to Tuning Your Violin

Understanding Violin Pitch

The violin is traditionally tuned in perfect fifths, starting with the G3 string, followed by D4, A4, and E5. The standard reference pitch for A4 is 440 Hz, although some orchestras use 442 or 443 Hz to achieve a brighter sound. Because instruments are sensitive to changes in temperature and humidity, pitch can shift significantly between practice sessions, making regular tuning essential for proper intonation.

The Tuning Sequence

Most players start by tuning the A4 string first, using a reference or an electronic tuner. Once the A string is stable, tune the D4 and G3 strings relative to it. Finally, tune the E5 string. When using this tuner, you can play each string using pizzicato for a clear onset or bow a long, steady note to see how the frequency stabilizes. This helps the microphone capture a consistent pitch for the most accurate reading.

Using Pegs and Fine Tuners

Fine tuners located on the tailpiece are designed for small adjustments. The E string is typically steel and almost always requires a fine tuner to handle its high tension. For large pitch changes, use the wooden pegs. When turning a peg, push it slightly inward toward the peg box while rotating it to help the wood grip and hold the string tension. Always turn slowly to avoid overshooting the target or snapping a string, especially on the E string.

Maintaining Bridge Alignment

Tuning creates significant tension that pulls the top of the bridge toward the fingerboard. Over time, this can cause the bridge to warp or lean. Periodically check that your bridge remains upright and perpendicular to the top of the violin. If the bridge begins to tilt forward, you may need to carefully adjust it back to its correct position to prevent it from collapsing or snapping under the pressure.

Tuning and Equal Temperament

This tuner uses equal-temperament targets for note detection. While experienced violinists often tune by listening for the disappearance of beats in perfect fifths, the difference between pure fifths and equal temperament is only about 2 cents. For general practice, this difference is negligible and remains well within the expected accuracy of an electronic tuner. If you have recently installed new strings, expect them to stretch frequently over the first few days of use.

Common Tuning Questions

Does this violin tuner require any software installation?

No. This tool runs entirely in your web browser. You do not need to download any files or create an account to start tuning your instrument immediately.

What is the recommended tuning sequence for the violin?

Standard procedure is to tune the A4 string first, followed by the D4, G3, and finally the E5 string. This provides a stable anchor for the other strings.

How do I know if my violin is in tune?

The tuner displays your note and frequency. The cents meter indicates accuracy. A reading within 5 cents of the target note is generally considered to be in tune.

Can I change the reference frequency from 440 Hz?

Yes. The tuner includes an adjustable A4 reference setting that allows you to change the base frequency from 430 Hz to 450 Hz to suit your specific needs.

Why do my new strings keep going out of tune?

New strings naturally stretch under tension. This is a common occurrence that will continue until the strings have fully settled, which typically takes a few days.