Online Mandolin Tuner (G D A E)
This free browser tool helps you tune your mandolin strings accurately. It runs directly in your web browser without requiring an account.
How to use the mandolin tuner
To tune your mandolin, first select the mandolin from the instrument list and choose the standard tuning preset. Click the start button to allow microphone access, then pluck a single string on your instrument. The tuner displays the detected note, its frequency, and a cents meter. If the meter shows a minus value, the note is flat, while a plus value indicates the note is sharp. Aim to keep the indicator within 5 cents of the center to be in tune. You can adjust the A4 reference frequency from 430 to 450 Hz if needed, with the default set at 440 Hz. For best results, pluck each string individually while muting its pair to ensure a clear reading on the meter.
Target notes and frequencies
Mandolin standard (GG DD AA EE)
| String | Note | Frequency (A4 = 440 Hz) |
|---|---|---|
| 4 | G3 | 196.00 Hz |
| 3 | D4 | 293.66 Hz |
| 2 | A4 | 440.00 Hz |
| 1 | E5 | 659.26 Hz |
String numbers follow the usual convention: string 1 is the thinnest full-length string. Frequencies are equal-tempered values for A4 = 440 Hz.
Mandolin Tuning Essentials
Understanding Mandolin String Courses
A mandolin typically features four courses of paired strings tuned to G3, D4, A4, and E5. This tuning matches the standard violin tuning scheme. Each pair within a course should sound at the exact same pitch, known as unison. Because the tuner analyzes the input frequency, you should tune each string of a pair separately. You can mute or lightly damp the partner string while plucking to prevent the tuner from trying to read the combined frequency of both strings, which can cause the meter to wobble.
The Role of the Floating Bridge
The bridge on a mandolin is held in place solely by the pressure of the strings. If you make significant adjustments to your tuning, the tension changes can cause the bridge to shift position. Always verify that the bridge has not moved after completing your tuning. The intonation of the instrument is dependent on the precise placement of this bridge, so keeping it properly positioned is essential for playing in tune across the entire fretboard.
Managing Geared Pegs and Tension
Mandolin tuning pegs are equipped with gears that allow for precise control. Turn these pegs slowly to avoid overshooting your target pitch, especially when working with the high E strings. These strings are thin and prone to breaking if stretched too quickly or tuned higher than intended. Apply a consistent, moderate attack with your pick when plucking the string for the tuner to ensure the microphone picks up a stable signal.
Checking Unison by Ear
After using the digital tuner to get each individual string close, play both strings of the pair together and listen carefully. If the strings are not perfectly in unison, you will hear a beating sound caused by the slight frequency difference. Small adjustments can be made until this interference pattern disappears, resulting in a clean and resonant tone. This physical verification ensures that your digital tuning holds up to the reality of the instrument acoustics.
Tuning by Fifths
Mandolins are tuned in intervals of fifths. You can verify your tuning by using the frets as a reference. The seventh fret of one course should match the open note of the next higher course. For example, pressing the G strings at the seventh fret should produce a D note, which matches the pitch of the open D strings. This method provides a useful way to cross-check your tuning accuracy across the entire instrument neck.
Common Questions
Does this mandolin tuner require software installation?
No, this is a web-based tool. It runs entirely within your browser, so you do not need to download or install any applications to use it.
Why does the meter wobble when I play a pair of strings?
The tuner is likely detecting the slightly different frequencies of both strings at once. To get an accurate reading, mute or damp one string in the pair while tuning the other individually.
Can I change the A4 reference frequency?
Yes, the tool features an adjustable A4 reference. You can set this value anywhere between 430 and 450 Hz, depending on your specific requirements or ensemble needs.
How do I know if my mandolin is in tune?
The tuner provides a cents meter. When the indicator stays within about 5 cents of the center, your note is considered in tune. A minus reading means flat, while plus means sharp.