Akordify

Online Ukulele Tuner (G C E A)

This browser tool helps you reach correct pitch on your ukulele. It works directly in your web browser and requires no account or installation.

How to use this ukulele tuner

To use this tuner, first select your instrument type from the menu. Choose the correct tuning preset, such as standard G4 C4 E4 A4 or low G, to ensure the tool tracks the correct notes. Click the start button to activate your microphone. Once active, pluck a string. The screen will display the detected note name and frequency. A cents meter shows how close the note is to the target. If the indicator shows a minus value, the note is flat. A plus value indicates the note is sharp. Aim for a reading within about 5 cents of zero to consider the string in tune. You can adjust the A4 reference frequency from 430 to 450 Hz if needed. The default is 440 Hz.

Target notes and frequencies

Standard, high G (re-entrant)

StringNoteFrequency (A4 = 440 Hz)
4G4392.00 Hz
3C4261.63 Hz
2E4329.63 Hz
1A4440.00 Hz

Low G

StringNoteFrequency (A4 = 440 Hz)
4G3196.00 Hz
3C4261.63 Hz
2E4329.63 Hz
1A4440.00 Hz

Baritone ukulele

StringNoteFrequency (A4 = 440 Hz)
4D3146.83 Hz
3G3196.00 Hz
2B3246.94 Hz
1E4329.63 Hz

D tuning

StringNoteFrequency (A4 = 440 Hz)
4A4440.00 Hz
3D4293.66 Hz
2F#4369.99 Hz
1B4493.88 Hz

String numbers follow the usual convention: string 1 is the thinnest full-length string. Frequencies are equal-tempered values for A4 = 440 Hz.

Understanding Ukulele Tuning

Standard Ukulele Tuning

Most soprano, concert, and tenor ukuleles use standard tuning, which follows the notes G4, C4, E4, and A4. These strings are listed from the fourth string, which is nearest your chin, to the first string. This is a re-entrant tuning, meaning the fourth string is actually higher in pitch than the third string. Because of this, the strings do not rise in pitch in a linear fashion from the top string to the bottom. Many players use the mnemonic phrase My Dog Has Fleas to remember these notes.

Low G and Baritone Options

Some players prefer a low G tuning, which uses G3, C4, E4, and A4. This setup requires a thicker or wound fourth string to accommodate the lower pitch. Baritone ukuleles use a completely different set of notes, specifically D3, G3, B3, and E4. This matches the four highest strings of a standard guitar. Using the appropriate preset in the tuner ensures you are tracking the correct fundamental frequencies for these specific configurations.

Managing String Stability

Nylon and fluorocarbon strings are prone to stretching significantly when they are new. This causes the instrument to go out of tune rapidly during the first few days of use. You will need to retune the instrument frequently until the strings settle. When using friction pegs, turn them very slowly to avoid overshooting the target pitch. Geared pegs generally provide more resistance and stability, making fine adjustments easier to manage during practice sessions.

Alternative Tuning Styles

Beyond standard settings, D tuning is an older style that sits a whole step higher than standard, using the notes A4, D4, F#4, and B4. The tuner provides these as selectable presets to assist with accurate adjustments. While some musicians practice tuning by ear, relying on a digital tool that analyzes frequency provides a clear visual confirmation of the pitch. This is especially helpful when you are still training your ears to recognize subtle differences in cents.

Using Reference Pitch

Standard modern musical pitch is calibrated to A4 at 440 Hz. However, some environments or older recording styles utilize different reference points. This tool allows you to adjust your reference from 430 to 450 Hz. If you find your instrument sounds slightly flat or sharp compared to a fixed reference, verify that your base frequency setting matches the intended calibration for your specific musical context.

Technical Considerations for Accuracy

Microphone placement matters when using a digital tuner. Ensure your environment is quiet so the software can isolate the sound of your string from background noise. If the tuner struggles to pick up the note, try plucking the string firmly near the soundhole. The microphone is only used after you click the start button, and you can stop it with the same button when you are done.

Common Questions

Do I need to create an account to use the tuner?

No, this tool is free and does not require you to create an account. It functions entirely within your web browser.

What does a negative value on the cents meter mean?

A negative value on the cents meter means the note is flat, or below the target frequency. You should tighten the string slightly to raise the pitch.

How can I remember the standard tuning notes?

Many ukulele players use the mnemonic phrase My Dog Has Fleas to remember the notes G, C, E, and A, corresponding to the strings from top to bottom.

Why does my new ukulele go out of tune quickly?

New nylon or fluorocarbon strings stretch significantly when first installed. This is normal, and the strings will require frequent retuning until they have fully stretched and stabilized.